Can PLA go in a car?
Not recommended. Car interiors often exceed 60°C in summer and PLA softens around 55°C. For car parts use ASA or ABS.
MATERIAL · PLA
The most popular 3D printing material: easy to print, a fine surface, the widest color choice and the lowest price. For appearance prototypes, display models, figures and teaching aids, start with PLA.
01 · PROPERTIES
| Strength & toughness | Hard and stiff, but brittle — can snap under impact or repeated bending |
| Heat (reference) | Starts softening around 55°C; not for car interiors or hot places |
| Outdoor use | Not recommended for long-term sun and rain |
| Surface & detail | Fine surface, crisp details, least visible layer lines |
| Colors | The widest choice — pick a color in the quote and see it in the 3D preview |
| Price | Lowest cost and fastest turnaround |
Heat values are general reference figures; real performance depends on design, load and environment.
02 · USES
03 · DESIGN TIPS
PLA is stiff and brittle, so keep snap-fit deflection small — see the snap-fit guide; for holes and fits see tolerances and clearances. Need more durability? Choose PETG.
04 · PRICE
Pricing is based on PLA material weight, print time and quantity — upload your model to the instant quote to see it; the minimum order is NT$150. Available colors are shown in the quote, and the 3D preview changes to your color.
05 · COMPARE
FAQ
Not recommended. Car interiors often exceed 60°C in summer and PLA softens around 55°C. For car parts use ASA or ABS.
PLA has a finer surface, more colors and a lower price; PETG is tougher, less brittle and handles about 70°C, so it suits functional parts. Choose PLA for looks, PETG for use.
See the price right after uploading. Not sure which material? Tell us what it's for and we'll recommend one.
Upload for a quote Contact us on LINE