PA-CF or PETG-CF?
PA-CF handles more heat (about 150°C vs 75°C) and is tougher and more wear resistant, for high loads or parts near heat. For ordinary jigs and brackets PETG-CF is enough and costs less.
MATERIAL · PA-CF
Nylon filled with carbon fiber: higher strength, stiffness and heat resistance than PETG-CF, plus excellent wear resistance — the first choice for high-load mechanical parts and jigs near heat.
01 · PROPERTIES
| Strength & stiffness | High strength and stiffness while keeping nylon's toughness |
| Heat (reference) | About 150°C |
| Wear | Wear and friction resistant — good for gears and sliding parts |
| Surface | Matte carbon texture with subtle layer lines |
| Moisture | Nylon absorbs moisture, so dimensions and strength vary slightly with humidity |
| Price | Above PETG-CF; see your quote |
Heat values are general reference figures; real performance depends on design, load and environment.
02 · USES
03 · DESIGN TIPS
Nylon absorbs moisture, so leave a little extra clearance on precise fits — see tolerances and clearances; fasten with heat-set inserts. If heat isn't an issue and budget matters, try PETG-CF first.
04 · PRICE
Pricing is based on PA-CF material weight, print time and quantity — upload your model to the instant quote to see it; the minimum order is NT$150. Available colors are shown in the quote, and the 3D preview changes to your color.
05 · COMPARE
FAQ
PA-CF handles more heat (about 150°C vs 75°C) and is tougher and more wear resistant, for high loads or parts near heat. For ordinary jigs and brackets PETG-CF is enough and costs less.
Yes — it's tough and wear resistant, great for small gears and sliding parts. For high speed or heavy loads, test a small batch first.
See the price right after uploading. Not sure which material? Tell us what it's for and we'll recommend one.
Upload for a quote Contact us on LINE