Can TPU make tires or non-slip pads?
Yes — non-slip pads, small tires and roller covers are common. Use 95A or 90A for wear resistance without being too soft.
MATERIAL · TPU
Soft and elastic like rubber, abrasion and tear resistant, and able to flex again and again. Available in 95A, 90A and 85A — the lower the number, the softer.
01 · PROPERTIES
| Hardness | 95A firmest (like a phone case), 90A medium, 85A softest (like an eraser) |
| Flex & wear | Bends and compresses repeatedly; abrasion and tear resistant |
| Heat (reference) | Softens around 60°C |
| Dimensional accuracy | Slightly lower than rigid materials; fine features and tight fits are harder |
| Colors | Fewer colors; see the quote page |
| Price | Prints slower, so costs more than PLA or PETG |
Heat values are general reference figures; real performance depends on design, load and environment.
02 · USES
03 · DESIGN TIPS
Choosing a hardness: 95A holds its shape but flexes (easiest to print, most accurate); 90A for cushions that compress more; 85A for a very soft, silicone-like feel. Keep walls at least 1.2 mm — see the wall thickness guide.
04 · PRICE
Pricing is based on TPU material weight, print time and quantity — upload your model to the instant quote to see it; the minimum order is NT$150. Available colors are shown in the quote, and the 3D preview changes to your color.
05 · COMPARE
FAQ
Yes — non-slip pads, small tires and roller covers are common. Use 95A or 90A for wear resistance without being too soft.
Flexible filament must print slowly to come out well, so print time is longer and the price is higher than PLA or PETG. Upload your model to see the actual price.
See the price right after uploading. Not sure which material? Tell us what it's for and we'll recommend one.
Upload for a quote Contact us on LINE