PC vs ABS?
PC handles more heat (about 115°C vs 95°C) and more impact, at a higher price. For enclosures within ABS's temperature range, ABS is fine.
MATERIAL · PC
An engineering plastic known for toughness: impact resistant, heat resistant to about 115°C and dimensionally stable — for enclosures and mechanisms that must handle heat and knocks.
01 · PROPERTIES
| Impact resistance | Very tough; doesn't shatter on impact |
| Heat (reference) | About 115°C, higher than ABS |
| Dimensional stability | Stable under heat and load |
| Outdoor use | Slowly yellows in long-term sun; choose ASA outdoors |
| Printability | Higher shrinkage; large parts are checked for warping |
| Price | Above ABS; see your quote |
Heat values are general reference figures; real performance depends on design, load and environment.
02 · USES
03 · DESIGN TIPS
PC is tough, so snap-fits work well — see the snap-fit guide. For large parts add fillets, split them or add ribs to prevent warping; for walls see the wall thickness guide. Need stiffer and more stable? Choose PC-CF.
04 · PRICE
Pricing is based on PC material weight, print time and quantity — upload your model to the instant quote to see it; the minimum order is NT$150. Available colors are shown in the quote, and the 3D preview changes to your color.
05 · COMPARE
FAQ
PC handles more heat (about 115°C vs 95°C) and more impact, at a higher price. For enclosures within ABS's temperature range, ABS is fine.
PC resin can be transparent, but printed layer lines make parts translucent at best — not clear like injection molding.
See the price right after uploading. Not sure which material? Tell us what it's for and we'll recommend one.
Upload for a quote Contact us on LINE